12v Mini and Super Mini Neon Flex Accessories

£0.40

VAT included. Delivery calculated at checkout (normally free)

12v Mini and Super Mini Neon Flex Accessories

Quantity

These accessories are everything you will need to make a Neon Flex sign or to create a linear lighting design installation using 12v Neon Flex.

Use the dropdown menu to select different accessories.

Clear End Caps

Bespoke End caps which fit over the end of a length of 12v Neon Flex. These end caps fit friction tight to the Neon Flex and are best used for outdoor signs which need to be waterproofed. (If waterproofing use in conjunction with waterproof silicone and waterproof heat shrink).

Flush Fit End Caps

Bespoke flush fit End Caps. To be glued onto the end of a Neon Flex length, these end caps also have a small cut out which can be used to thread the 2 core wire through.

Clear 2 Core Wire (22 Awg)

Priced Per Metre. To be soldered onto the Neon Flex and for connecting each length of Neon Flex together. Clear 2 core wire is typically used for the tidiest finish on an LED Neon Flex sign.

22 Awg Front Connector and Female Connector

A Front Connector gives a tidy finish and will connect straight to the 12v Power Supply needed to power the Neon Flex.

Heat Shrink

Heat shrink goes over each end of a Neon Flex length.

Waterproof Heat Shrink

Glue Lined Waterproof Heat Shrink needs to be used for all external signage which may come into contact with moisture. Used in conjunction with waterproof silicone.

12v 45w Waterproof Power Supply (IP68)

CE Marked 45watt IP68 Waterproof Power Supply. Suitable for upto 4 metres of 12v Neon Flex

12v 100w Waterproof Power Supply (IP69) - Suitable for upto 9 metres of 12v Neon Flex

CE Marked 100watt IP68 Waterproof Power Supply. Suitable for upto 9 metres of 12v Neon Flex

Clear Waterproof Silicone

To be used inside the end cap and around the outside of the Waterproof Heat Shrink